Core-Shell Nanocables Decorated with Carbon Spherical Shells and Silver Nanoparticles for Sensing Ethinylestradiol Hormone in Water Sources and Pills.

The selective, rapid detection of low levels of hormones in drinking water and foodstuffs requires materials suitable for inexpensive sensing platforms. We report on core-shell Ag@C nanocables (NCs) decorated with carbon spherical shells (CSSs) and silver nanoparticles (AgNPs) by using a hydrothermal green approach. Sensors were fabricated with homogeneous, porous films on screen-printed electrodes, which comprised a 115 nm silver core covered by a 122 nm thick carbon layer and CSSs with 168 nm in diameter. NCs and CSSs were also decorated with 10-25 nm AgNPs. The NC/CSS/AgNP sensor was used to detect ethinylestradiol using square wave voltammetry in 0.1 M phosphate buffer (pH 7.0) over the 1.0-10.0 µM linear range with a detection limit of 0.76 µM. The sensor was then applied to detect ethinylestradiol in tap water samples and a contraceptive pill with recovery percentages between 93 and 101%. The high performance in terms of sensitivity and selectivity for hormones is attributed to the synergy between the carbon nanomaterials and AgNPs, which not only increased the sensor surface area and provided sites for electron exchange but also imparted an increased surface area.

Sustainable plant-wearable sensors for on-site, rapid decentralized detection of pesticides toward precision agriculture and food safety.

The synergy between eco-friendly biopolymeric films and printed devices leads to the production of plant-wearable sensors for decentralized analysis of pesticides in precision agriculture and food safety. Herein, a simple method for fabrication of flexible, and sustainable sensors printed on cellulose acetate (CA) substrates has been demonstrated to detect carbendazim and paraquat in agricultural, water and food samples. The biodegradable CA substrates were made by casting method while the full electrochemical system of three electrodes was deposited by screen-printing technique (SPE) to produce plant-wearable sensors. Analytical performance was assessed by differential pulse (DPV) and square wave voltammetry (SWV) in a linear concentration range between 0.1 and 1.0 µM with detection limits of 54.9 and 19.8 nM for carbendazim and paraquat, respectively. The flexible and sustainable non-enzymatic plant-wearable sensor can detect carbendazim and paraquat on lettuce and tomato skins, and also water samples with no interference from other pesticides. The plant-wearable sensors had reproducible response being robust and stable against multiple flexions. Due to high sensitivity and selectivity, easy operation and rapid agrochemical detection, the plant-wearable sensors can be used to detect biomarkers in human biofluids and be used in on-site analysis of other hazardous chemical substances.

Optimized paper-based electrochemical sensors treated in acidic media to detect carbendazim on the skin of apple and cabbage.

Wearable sensors such as those made with paper are needed for non-destructive routine analysis of pesticides on plants, fruits, and vegetables. Herein we report on electrochemical sensors made with screen-printed carbon electrodes on kraft and parchment papers to detect the fungicide carbendazim. A systematic optimization was performed to find that electrochemical sensors on kraft paper treated in an acidic medium led to the highest performance, with a detection limit of 0.06 µM for carbendazim. The enhanced sensitivity for this sensor was attributed to the porous nature of kraft paper, which allowed for a large electrode surface area, and to the carboxylic groups formed during electrochemical activation. As a proof-of-concept, the electrochemical sensor attached to the skin of apple and cabbage was used to detect carbendazim with the same performance as the gold standard method, thus demonstrating that the sensor can be used in the farm and on supermarket shelves.

Wearable potentiometric biosensor for analysis of urea in sweat.

Herein, we introduce wearable potentiometric biosensors on screen-printed carbon electrodes (SPCEs) for on-body and on-site monitoring of urea in sweat. The biosensor architecture was judiciously designed to detect urea at different pHs and incorporate a pH sensor, thus containing polyaniline ink, urease bioink and a polyvinylchloride membrane. Urea detection could be performed in the wide range from 5 to 200 mM at pH 7.0, encompassing urea levels in human sweat. The biosensor response was fast (incubation time 5 min), with no interference from other substances in sweat. Reliable urea detection could be done in undiluted human sweat with a skin-worn flexible device using the pH correction strategy afforded by the pH sensor. The performance of the epidermal biosensor was not affected by severe bending strains. The feasibility of mass production was demonstrated by fabricating epidermal flexible biosensors using slot-die coating with a roll-to-roll technique.

Label-Free Electrochemical Immunosensor Made with Tree-like Gold Dendrites for Monitoring 25-Hydroxyvitamin D3 Metabolite.

Flexible, fully printed immunosensors can meet the requirements of precision nutrition, but this demands optimized molecular architectures to reach the necessary sensitivity. Herein, we report on flexible and label-free immunosensor chips made with tree-like gold dendrites (AuDdrites) electrochemically formed by selective desorption of l-cysteine (L-cys) on (111) gold planes. Electrodeposition was used because it is scalable and cost-effective for a rapid, direct growth of Au hyperbranched dendritic structures. The 25-hydroxyvitamin D3 (25(OH)D3) metabolite was detected within 15 min with a limit of detection (LOD) of 0.03 ng mL-1. This high performance was possible due to the careful optimization of the electroactive layer and working conditions for square wave voltammetry (SWV). Electrocrystallization was manipulated by controlling the deposition potential and the molar ratio between HAuCl4 and L-cys. Metabolite detection was performed on human serum and saliva samples with adequate recovery between 97% and 100%. The immunosensors were stable and reproducible, unresponsive to interference from other molecules in human serum and saliva. They can be extended for use as wearable sensors with their mechanical flexibility and possible customization.

Low-cost bacterial nanocellulose-based interdigitated biosensor to detect the p53 cancer biomarker.

Low-cost sensors to detect cancer biomarkers with high sensitivity and selectivity are essential for early diagnosis. Herein, an immunosensor was developed to detect the cancer biomarker p53 antigen in MCF7 lysates using electrical impedance spectroscopy. Interdigitated electrodes were screen printed on bacterial nanocellulose substrates, then coated with a matrix of layer-by-layer films of chitosan and chondroitin sulfate onto which a layer of anti-p53 antibodies was adsorbed. The immunosensing performance was optimized with a 3-bilayer matrix, with detection of p53 in MCF7 cell lysates at concentrations between 0.01 and 1000 Ucell. mL-1, and detection limit of 0.16 Ucell mL-1. The effective buildup of the immunosensor on bacterial nanocellulose was confirmed with polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) and surface energy analysis. In spite of the high sensitivity, full selectivity with distinction of the p53-containing cell lysates and possible interferents required treating the data with a supervised machine learning approach based on decision trees. This allowed the creation of a multidimensional calibration space with 11 dimensions (frequencies used to generate decision tree rules), with which the classification of the p53-containing samples can be explained.

Photocatalysis of TiO2 Sensitized with Graphitic Carbon Nitride and Electrodeposited Aryl Diazonium on Screen-Printed Electrodes to Detect Prostate Specific Antigen under Visible Light.

We report on a photoelectrochemical (PEC) device to detect prostatic-specific antigen (PSA) under visible LED light irradiation within the point-of-care (POC) paradigm. The device consists of a 3D printed miniaturized photoelectrochemical system and a disposable PEC immunosensor made with screen-printed carbon electrodes (SPCEs). The SPCEs were coated with nickel single atoms anchored on graphitic carbon nitride (Ni-gC3N4), titanium dioxide nanoparticles (TiO2), and aryl diazonium salt prepared from p-aminobenzoic acid. The electrodeposited aryl diazonium on Ni-gC3N4/TiO2 decreased the recombination of photogenerated charge carriers, leading to a 3.1-fold increase in the photocurrent compared to pure TiO2. This functionalization strategy provides carboxylic groups to anchor antibodies via the carbodiimide reaction, which may be extended to any other type of immunosensor. Under optimal conditions, the PEC immunosensor was able to detect PSA from 10-16 to 10-8 g mL-1 with a detection limit of 0.06 fg mL-1. The device robustness was confirmed with reproducibility and stability tests. PSA could also be detected in human serum samples, which demonstrates the potential of the PEC immunosensor for clinical diagnosis.

Wearable sensors made with solution-blow spinning poly(lactic acid) for non-enzymatic pesticide detection in agriculture and food safety.

On-site monitoring the presence of pesticides on crops and food samples is essential for precision and post-harvest agriculture, which demands nondestructive analytical methods for rapid, low-cost detection that is not achievable with gold standard methods. The synergy between eco-friendly substrates and printed devices may lead to wearable sensors for decentralized analysis of pesticides in precision agriculture. In this paper we report on a wearable non-enzymatic electrochemical sensor capable of detecting carbamate and bipyridinium pesticides on the surface of agricultural and food samples. The low-cost devices (

A sandwich-type electrochemical immunosensor based on Au-rGO composite for CA15-3 tumor marker detection.

A sensitive detection of carbohydrate antigen 15-3 (CA15-3) levels may allow for early diagnosis and monitoring the treatment of breast cancer, but this can only be made in routine clinical practice if low-cost immunosensors are available. In this work, we developed a sandwich-type electrochemical immunosensor capable of rapid detection of CA15-3 with an ultra-low limit of detection (LOD) of 0.08 fg mL-1 within a wide linear concentration range from 0.1 fg mL-1 to 1 µg mL-1. The immunosensor had a matrix of a layer-by-layer film of Au nanoparticles and reduced graphene oxide (Au-rGO) co-electrodeposited on screen-printed carbon electrodes (SPCE). The high sensitivity was achieved by using secondary antibodies (Ab2) labeled with horseradish peroxidase (HRP) in the presence of hydrogen peroxide (H2O2) as signal amplifiers, and hydroquinone (HQ) was used as an electron mediator. The immunosensor was selective for CA15-3 in human serum and artificial saliva samples, robust, and stable to permit storage at 4 °C for more than 30 days. With its high performance, the immunosensor may be incorporated into future point-of-care (POC) devices to determine CA15-3 in distinct biological fluids, including in blood and saliva samples.

Flexible and integrated dual carbon sensor for multiplexed detection of nonylphenol and paroxetine in tap water samples.

Multiplex detection of emerging pollutants is essential to improve quality control of water treatment plants, which requires portable systems capable of real-time monitoring. In this paper we describe a flexible, dual electrochemical sensing device that detects nonylphenol and paroxetine in tap water samples. The platform contains two voltammetric sensors, with different working electrodes that were either pretreated or functionalized. Each working electrode was judiciously tailored to cover the concentration range of interest for nonylphenol and paroxetine, and square wave voltammetry was used for detection. An electrochemical pretreatment with sulfuric acid on the printed electrode enabled a selective detection of nonylphenol in 1.0-10 × 10-6 mol L-1 range with a limit of detection of 8.0 × 10-7 mol L-1. Paroxetine was detected in the same range with a limit of detection of 6.7 × 10-7 mol L-1 using the printed electrode coated with a layer of carbon spherical shells. Simultaneous detection of the two analytes was achieved in tap water samples within 1 min, with no fouling and no interference effects. The long-term monitoring capability of the dual sensor was demonstrated in phosphate buffer for 45 days. This performance is statistically equivalent to that of high-performance liquid chromatography (HPLC) for water analysis. The dual-sensor platform is generic and may be extended to other water pollutants and clinical biomarkers in real-time monitoring of the environment and health conditions. Silver pseudo-reference electrodes for paroxetine (REP) and nonylphenol (REN), working electrodes for paroxetine (WP) and nonylphenol (WN), and auxiliary electrode (AE). USP refers to the University of Sao Paulo. "Red" is reduced form and "Oxi" is oxidized form of analytes.

Biomimetic electrochemical sensors: New horizons and challenges in biosensing applications.

The urge to meet the ever-growing needs of sensing technology has spurred research to look for new alternatives to traditional analytical methods. In this scenario, the glucometer is the flagship of commercial electrochemical sensing platforms, combining selectivity, reliability and portability. However, other types of enzyme-based biosensors seldom achieve the market, in spite of the large and increasing number of publications. The reasons behind their commercial limitations concern enzyme denaturation, and the high costs associated with procedures for their extraction and purification. In this sense, biomimetic materials that seek to imitate the desired properties of natural enzymes and biological systems have come out as an appealing path for robust and sensitive electrochemical biosensors. We herein portray the historical background of these biomimicking materials, covering from their beginnings until the most impactful applications in the field of electrochemical sensing platforms. Throughout the discussion, we present and critically appraise the major benefits and the most significant drawbacks offered by the bioinspired systems categorized as Nanozymes, Synzymes, Molecularly Imprinted Polymers (MIPs), Nanochannels, and Metal Complexes. Innovative strategies of fabrication and challenging applications are further reviewed and evaluated. In the end, we ponder over the prospects of this emerging field, assessing the most critical issues that shall be faced in the coming decade.

Lemongrass (Cymbopogon citratus (D.C.) Stapf) Presents Antitumoral Effect and Improves Chemotherapy Activity in Prostate Cancer Cells.

BACKGROUND: Prostate cancer is the most common visceral neoplasia in men and frequently presents chemotherapy resistance. In this context, lemongrass (Cymbopogon citratus (D.C.) Stapf) has been studied since it presents many important biological activities, such as anticancer. OBJECTIVE: We investigated the antitumor effect of lemongrass and in chemotherapy activity using prostate cancer cells line (DU-145). METHODS: DU-145 cells were exposed to different concentrations of aqueous extract of lemongrass (30; 100; 300; 500 and 1000 µg/mL), isolated and in combination with docetaxel, during 24 and 72 hours. After, cell viability and proliferation, oxidative metabolism, colony formation and cell cycle analyses were performed. Also, we exposed the African green monkey kidney cell line (VERO) to the same lemongrass concentrations to investigate a possible toxicity of this extract. RESULTS: Our findings suggested that lemongrass presented an antitumor effect and improved docetaxel chemotherapy activity by decreasing cell viability and proliferation as well as colony formation. Moreover, we found an oxidative stress increased and cell cycle arresting in G0 /G1 phase. In addition, this extract presented selectivity action for cancer cells, since it did not cause cytotoxicity in normal cells, ensuring non-toxic therapeutic concentrations. CONCLUSION: Lemongrass is a promising medicinal plant that could be used during chemotherapeutic treatment, in order to potentiate the antitumor response and decrease the resistance of prostate cancer.

Adhesion to oviduct glycans regulates porcine sperm Ca2+ influx and viability.

Before fertilization, sperm bind to epithelial cells of the oviduct isthmus to form a reservoir that regulates sperm viability and capacitation. The sperm reservoir maintains optimum fertility in species, like swine, in which semen deposition and ovulation may not be well synchronized. We demonstrated previously that porcine sperm bind to two oviductal glycan motifs, a biantennary 6-sialylated N-acetyllactosamine (bi-SiaLN) oligosaccharide and 3-O-sulfated Lewis X trisaccharide (suLeX). Here, we assessed the ability of these glycans to regulate sperm Ca2+ influx, capacitation and affect sperm lifespan. After 24 h, the viability of sperm bound to immobilized bi-SiaLN and suLeX was higher (46% and 41% respectively) compared to viability of free-swimming sperm (10-12%). Ca2+ is a central regulator of sperm function so we assessed whether oviduct glycans could affect the Ca2+ influx that occurs during capacitation. Using a fluorescent intracellular Ca2+ probe, we observed that both oviduct glycans suppressed the Ca2+ increase that occurs during capacitation. Thus, specific oviduct glycans can regulate intracellular Ca2+. Because the increase in intracellular Ca2+ was suppressed by oviduct glycans, we examined whether glycans affected capacitation, as determined by protein tyrosine phosphorylation and the ability to undergo a Ca2+ ionophore-induced acrosome reaction. We found no discernable suppression of capacitation in sperm bound to oviduct glycans. We also detected no effect of oviduct glycans on sperm motility during capacitation. In summary, LeX and bi-SiaLN glycan motifs found on oviduct oligosaccharides suppress the Ca2+ influx that occurs during capacitation and extend sperm lifespan but do not affect sperm capacitation or motility.

Development and validation of an advanced electrochemical sensor for the fast and cheap determination of hydrochlorothiazide in urine samples using the Monte-Carlo method for uncertainty evaluation.

This work describes the development, optimization, and validation of an electrochemical method for the determination of hydrochlorothiazide (HCTZ) in urine. The method allows fast, cheap and reliable determinations of recent administrations of this diuretic that can be used in doping control in sport. The response of the sensor was determined by differential pulse voltammetry (DPV). The glassy carbon electrode was modified with multiwall carbon nanotubes (MWCNT) and gold nanoparticles. The sensor is calibrated in the analysed sample matrix by the cumulative standard addition method. The method validation was based on the bottom-up evaluation of the measurement uncertainty were components were combined using the Monte Carlo Method (MCM) applicable with no restrictions regarding components uncertainty value and measurement function linearity. The developed metrological models were implemented in MS-Excel spreadsheets. The adequacy of the electrochemical measurements was assessed by comparing their relative standard uncertainty with a target value of 20% and by evaluating the compatibility of measurements with determinations performed by a reference procedure. The tools developed for the construction and optimization of working electrodes are applicable to measurements of other analytes and matrices. The used cumulative standard addition method and respective measurement uncertainty models are applicable to any kind of non-destructive chemical measurement of a solution.

Full-genome sequences of porcine circovirus 3 (PCV3) and high prevalence in mummified fetuses from commercial farms in Brazil.

The clinical implications of recently discovered porcine circovirus 3 (PCV3) infections are still unknown. The potential role of this emerging virus in reproductive loss in swine has been described. Herein, we report a high prevalence of PCV3 in mummified fetuses from sows maintained in modern farms in Rio Grande do Sul, Santa Catarina, Paraná, Goiás, and Mato Grosso do Sul states, Brazil. For this analysis, 276 mummified fetuses from 11 commercial swine farms were included. The presence of PCV3 DNA was confirmed using PCR, and the complete sequence of five different viral strains was obtained. Sequences of PCV3 genomes available on GenBank were then used for phylogenetic tree construction. Of the 276 mummified fetuses examined, 270 (nearly 97%) were positive for PCV3. In 93.1% of the fetuses, co-infections with at least one of the following agents were identified: porcine parvovirus (PPV), porcine circovirus 2 (PCV2) and Leptospira spp. Twelve fetuses were positive for PCV3 alone. The amino acid sequence of the capsid gene for the five viral strains shared 98-100% homology among them. Analysis of the DNA sequence indicates that the viruses identified in this study belong to the PCV3a1 subgroup. In summary, PCV3 DNA was detected in mummified fetuses at a surprisingly high rate. The role of PCV3 in porcine circovirus-associated disease (PCVAD) is still uncertain. However, considering that PCV3 has been detected in a variety of conditions, even in healthy animals, the present results confirm the need to investigate PCV3 as a causative agent of fetal mummification in swine.

Release of Porcine Sperm from Oviduct Cells is Stimulated by Progesterone and Requires CatSper.

Sperm storage in the female reproductive tract after mating and before ovulation is a reproductive strategy used by many species. When insemination and ovulation are poorly synchronized, the formation and maintenance of a functional sperm reservoir improves the possibility of fertilization. In mammals, the oviduct regulates sperm functions, such as Ca2+ influx and processes associated with sperm maturation, collectively known as capacitation. A fraction of the stored sperm is released by unknown mechanisms and moves to the site of fertilization. There is an empirical association between the hormonal milieu in the oviduct and sperm detachment; therefore, we tested directly the ability of progesterone to induce sperm release from oviduct cell aggregates. Sperm were allowed to bind to oviduct cells or an immobilized oviduct glycan and then challenged with progesterone, which stimulated the release of 48% of sperm from oviduct cells or 68% of sperm from an immobilized oviduct glycan. The effect of progesterone on sperm release was specific; pregnenolone and 17α-OH-progesterone did not affect sperm release. Ca2+ influx into sperm is associated with capacitation and development of hyperactivated motility. Progesterone increased sperm intracellular Ca2+, which was abrogated by blocking the sperm-specific Ca2+ channel CatSper with NNC 055-0396. NNC 055-0396 also blocked the progesterone-induced sperm release from oviduct cells or immobilized glycan. An inhibitor of the non-genomic progesterone receptor that activates CatSper similarly blocked sperm release. This is the first report indicating that release of sperm from the sperm reservoir is induced by progesterone action through CatSper channels.

Electrocatalytic Oxidation of Methanol, Ethanol, and Glycerol on Ni(OH)2 Nanoparticles Encapsulated with Poly[Ni(salen)] Film.

This study describes a systematic investigation of the electrocatalytic activity of poly[Ni(salen)] films, as catalysts for the electro-oxidation of Cn alcohols (Cn = methanol, ethanol, and glycerol) in alkaline medium. The [Ni(salen)] complex was electropolymerized on a glassy carbon surface and electrochemically activated in NaOH solution by cyclic voltammetry. X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy results indicate that during the activation step the polymeric film hydrolyzes, leading to the formation of ß-Ni(OH)2 spherical nanoparticles, with an average size of 2.4 ± 0.5 nm, encapsulated with the poly[Ni(salen)] film. Electrochemical results obtained together with the in situ Fourier transform infrared spectroscopy confirm that the electro-oxidation of methanol, ethanol, and glycerol occurs by involving a cycling oxidation of ß-Ni(OH)2 with the formation of ß-NiOOH species, followed by the charge transfer to the alcohols, which regenerates ß-Ni(OH)2. Analyses of the oxidation products at low potentials indicate that the major product obtained during the oxidation of methanol and glycerol is the formate, while the oxidation of ethanol leads to the formation of acetate. On the other hand, at high potentials (E = 0.6 V), there is evidence that the oxidation of Cn alcohols leads to carbonate ions as an important product.

Bacterial Contaminants and Antimicrobial Susceptibility Profile of Boar Semen in Southern Brazil Studs / Contaminantes bacterianos y perfil de susceptibilidad del semen porcino en centros de recogida em Brasil

Abstract Objective. To assess the microbiological profile in seven Boar Studs (BS) in Southern Brazil, as well as evaluate antimicrobial susceptibility response to most commonly found microorganisms in BS. Material and methods. Bacteriologic analysis was carried out in samples from the water purification system, semen extender, raw and stored semen, lab benches, and other working surfaces. Results. Growth of a mixed bacterial population was observed in water samples from all but one BS. Approximately 85% of the BS had significant contamination on their working surfaces with at least one bacterial contaminant. A total of 86% of raw semen samples were contaminated with one or more different bacteria, while 100% of the boar studs provided contaminated samples. Bacterial susceptibility to antimicrobial agents varied from over 80% for gentamycin, neomycin and ceftiofur to 40% or less for penicillin and lincomycin. Conclusions. The identification of the critical points provides necessary support to devise better strategies to minimize contamination in BS. Also, assessing the level of antimicrobial drug resistance offers accurate information to formulate more efficient antibacterial protocols that closely observe the rational use of antibiotics.

Resumen Objectivo. Evaluar el perfil microbiológico de siete centros de recogida de semen porcino (BS) en el sur de Brasil, así como evaluar la susceptibilidad antimicrobiana a la mayoría de los microorganismos encontrados en los BS. Material y métodos. El análisis bacteriológico se realizó en muestras del sistema de purificación de agua, diluyentes de semen, semen crudo y almacenado, bancos de laboratorio y otras superficies de trabajo. Resultados. El crecimiento de una población bacteriana mixta se observó en muestras de agua de todas las BS excepto una. Aproximadamente el 85% de la BS tenía contaminación significativa en sus superficies de trabajo con al menos un contaminante bacteriano. Un total de 86% de muestras de semen crudo fueron contaminadas con una o más bacterias diferentes, mientras que el 100% de BS proporcionaron muestras contaminadas. La susceptibilidad bacteriana a agentes antimicrobianos varió en más del 80% para gentamicina, neomicina y ceftiofur a 40% o menos para penicilina y lincomicina. Conclusiones. La identificación de los puntos críticos proporciona el apoyo necesario para idear mejores estrategias para minimizar la contaminación en CRSP. Además, la evaluación del nivel de resistencia a los antimicrobianos ofrece información precisa para formular protocolos antibacterianos más eficientes que tengan en cuenta el uso racional de los antibióticos.

Functionalized polyacrylamide as an acetylcholinesterase-inspired biomimetic device for electrochemical sensing of organophosphorus pesticides.

A plethora of publications has continuously reported electrochemical biosensors for detection of pesticides. However, those devices rarely accomplish commercial application due to technical issues associated with the lack of stability and high cost of the biological recognition element (enzyme). Alternatively, the biomimetic catalysts have arisen as a candidate for application in electrochemical biosensors to overcome the enzymatic drawbacks, combining low cost scalable materials with superior stability. Herein, for the first time, we propose a biomimetic biosensor for organophosphorus pesticide detection employing a functionalized polyacrylamide, polyhydroxamicalkanoate (PHA), which mimics the performance of the acetylcholinesterase (AChE) enzyme. The PHA bears functional groups inserted along its backbone chain working as active sites. Thereby, PHA was immobilized on screen printed electrodes (SPE) through a blend formation with poly(ethylene glycol) methyl ether (mPEG) to prevent its leaching out from the surface. Under optimum conditions, the biomimetic sensor was employed for the amperometric detection of paraoxon-ethyl, fenitrothion and chlorpyrifos ranging from 1.0 and 10.0µmolL-1 with a limit of detection of 0.36µmolL-1, 0.61µmol L-1, and 0.83µmolL-1, respectively. Typical AChE-based interfering species did not affect the PHA performance, which endorsed its superior behavior. The proposed biomimetic biosensor, denoted as SPE/PHA/mPEG, represents a significant advance in the field, offering a new path for low cost devices by means of an artificial enzyme, simple configuration and superior stability. Moreover, the biosensor performance can be further improved by modifying the electrode surface to enhance electronic transfer rate.

Sensitive detection of estriol hormone in creek water using a sensor platform based on carbon black and silver nanoparticles.

We report the electrochemical detection of estriol using carbon black nanoballs (CNB) decorated with silver nanoparticles (AgNP) as electrode material. Homogeneous, porous films on glassy carbon electrodes (GCE) were obtained, with diameters of 20 - 25nm for CNB and 5 - 6nm for AgNP. CNB/AgNP electrodes had increased conductivity and electroactive area in comparison with bare GCE and GCE/CNB, according to cyclic voltammetry and electrochemical impedance spectroscopy. The oxidation potential peak was also down shifted by 93mV, compared to the bare GC electrode. Differential pulse voltammetry data were obtained in 0.1molL-1 PBS (pH 7.0) to detect estriol without the purification step, in the linear range between 0.2 and 3.0µmolL-1 with detection and quantification limits of 0.16 and 0.5µmolL-1 (0.04 and 0.16mgL-1), respectively. The sensor was used to detect estriol in a creek water sample with the same performance as in the official methodology based on high performance liquid chromatography.